After selecting your picture mode, click the Full DDC Reset button.Using the picture mode dropdown menu on the left, select which picture mode you would like to calibrate.Calibrations to one mode and colorspace do not affect the other picture modes. Each Picture Mode is a separate memory slot for calibration data.When prompted, enter the 8 digit passcode displayed on the TV.Enter your TV's IP Address into the connection dialog box, and click Connect.Pick the LCD or OLED Model you are calibrating in the drop down under Model.Step 4 Connect to, and prepare your LG TV for calibration This will provide a point of reference to compare your calibration results.
To take Pre-Calibration Measurements click the Read Series button to measure the display's grayscale and ColorChecker response.These will be used to compare your calibration results Step 3 In this step, you'll take readings of your display before the calibration. Click the Find Source button then select your source.If you're using the internal pattern generator, see this article for connection steps Connect Pattern Source to your computer.SuperUHD LCD - LCD LED Blue-Green (2018 LG SuperUHD LCD for C6 Meter).OLED: White-OLED (OLED (White) LG, Panasonic, FSI 2018 for C6 Meter).When your meter is connected, select your display type from the dropdown (this will vary by meter).Plug your meter into a USB port on the computer and press the Find Meter button on the left.And, confirm your calibration targets, which have been pre-configured based on suggested values
Step 2 Connect your Colorimeter and Pattern Generator to Calman. At the end of the selected workflow, you will have the chance to proceed to another colorspace target.
This pre-configures the workflow for the desired targets.On the introduction screen, choose the Display Type (OLED/LCD) and Colorspace Target (SDR/HDR/Dolby Vision).From the Calman Menu in the top-left, choose Open Workflow Template and then LG AutoCal.For information see Calman Compatible Meters.